Linings can be applied to Tank Containers of all sizes ranging from a single cubic metre to 100 cubic metres with or without baffles or division plates. Following technical consultation in order to select the optimal lining, the internal surfaces or surfaces in contact with the product of the ISO Tank Container or Road Tanker Barrel are grit blasted to ensure optimum surface cleanliness and may include removal of an old or existing lining. Once satisfactory cleanliness has been achieved the lining process commences, consists of multiple coats until the desired dry film thickness (DFT) is obtained and in the case of heat cured, this will also involve heat curing between coats to part polymerize the resin. Once the target DFT is achieved the lining is subjected to holiday / spark testing to identify any defects and if found, made good prior to final heat cure and completion of the lining process.

SAEKAPHEN in company with our global network of partners, collectively present you with decades of bespoke experience and proficiency, guaranteeing dependable asset protection with over 2,000 positively tested media.

Benefit from the use of Saekaphen 、Chemline784、 carboline 3070、Heresite P-304 linings: Warranting exceptional chemical resistance against acidic and alkali media, including chlorinated hydrocarbons and at fluctuating temperatures. Our linings repel contamination of the surface, permitting optimum use of your asset and enhancing value.

Our customers offer various types of coatings
◆ CIMC,  NTTANK ,  JJAP,  SINGAMAS,  ZZTC 
◆ SAEKAPHEN SI14E  SI17TC  SI17E   SI17N....TANKS LINING
◆ CHEMLINE784/32  、CHEMLINE 784 ES
◆ CARBOLINE PLASITE 3070 TANKS LINING
◆ HERESITE P-403 TANKS LINING